On July 3rd, Shanxi Coking Coal Co., Ltd. subsidiary Coking Coal Coking 5# and 6# coke oven CDQ project started. The 5# and 6# coke oven CDQ project is a major measure for the company to improve the quality of coke, achieve energy conservation and emission reduction, and take the road of sustainable development. It is also another new bright spot for the company's transformation and development. After the CDQ project is completed and put into production, the sensible heat in the process of red coke quenching will be recovered at 3.6 million tons per year. The annual production of steam will be 1.8 million tons, the power generation will be 1000 kilowatt hours, and the recovery of coke powder will be 68,400 tons. To a good energy saving, reducing environmental pollution, improve the quality of coke. According to the plan, Shanxi Coking 5# and 6# coke oven CDQ project will be completed by the end of this year and put into operation in the first quarter of next year.

Plastic Pipe Vacuum Calibration Tank

The Molten Extrudate in The Extruder Is Drawn into The First Vacuum Chamber Through Calibration

The Vacuum Then Forces the Plastic Against the Calibration Tool While Cooling Its Surface Enough to Maintain Proper Dimensions. Cooling Water Enters the Chamber Through the Spray Bar.

The Calibrated Plastic Is Pulled Through a Second Vacuum Tank, Where It Is Cooled by Water Filling the Compartment. A Vacuum Can Be Applied to The Chamber to Help Maintain the Shape of The Plastic Product.

Depending On the Size of The Pipe, The Cooling System of The Vacuum Sizing Machine Can Be Cooled by Spray Cooling. Generally, Full Immersion Is Required When the Pipe Diameter Is Small, And Spray Cooling Is Appropriate When the Pipe Diameter Is Large.

After Cooling, The Plastic Product Passes Through the Final Chamber. The Rollers Help Guide the Plastic Through the Vacuum Setting Machine.

Plastic Vacuum Calibration Tank,Vacuum Tank,Plastic Pipe Calibrator

Zhangjiagang Polestar Machinery Co.,Ltd , https://www.polestarplast.com