Introduction: Silicon carbide high-flow nozzles, also known as vacuum reactive sintering silicon carbide desulfurization nozzles, are key components of thermal power plants, large-scale boilers, and desulphurization and dust removal equipment. Domestically produced reaction-sintering silicon carbide desulfurization and dust removal nozzles gradually replace imported products and have excellent properties such as high strength, high hardness, strong corrosion resistance, severe wear, high temperature resistance, and long service life under severe conditions.
B2 Forged Grinding Ball is hammer forged from selected high quality carbon and alloy steels. By hammer forged, the balls have good density and have the advantage of high hardness and good wear resistance, special used to gold mining, copper mining and sliver mining etc. Zhongwei B2 Forged Ball available diameter from 20mm to 140mm, B2 raw material chemical composition is C:0.72-0.85, Si:0.17-0.37, Mn:0.7-1.0, Cr: 0.4-0.6, P:≤0.025, S:≤0.025, hardness is 55-65HRC.
Forged Ball,Forged Steel Grinding Ball,B2 Forged Steel Ball,B2 Forged Grinding Steel Ball Jinan Zhongwei Casting And Forging Grinding Ball Co.,Ltd , https://www.cngrindingballs.com
Features of silicon carbide vortex nozzle: The spray flow method is hollow cone and the spraying area is circular. The entire nozzle is made of silicon carbide material. Applicable to very harsh working environments, the nozzles can produce a uniform, medium-to-large spray droplet size over a wide range of flow rates and pressures. The large flow silicon carbide nozzles have large, smooth flow channels to ensure no obstruction. The product is very resistant to heat, bending and corrosion. Widely used in waste gas cleaning, flue gas desulfurization systems, gas cooling and so on.
The characteristics of the hollow cone nozzle are as follows: The material of the nozzle is mainly silicon carbide, the connection size is from 1 inch to 4 inches, and the connection mode is winding adhesion, screw connection or flange connection. The spray shape is a hollow conical shape, the injection area is annular, the spray angle is 90° or 120°, and the droplet size is medium. Easy to install, good atomization, not easy to plug, long service life of the nozzle.
Silicon carbide spiral nozzle product features: Typical impact type dispersion spray, no structure inside the nozzle, is a smooth channel, the water flow through the layered interface of the impact spiral, resulting in layered spray. Each interface forms a cone-shaped spray surface, so the spray coverage increases. Screw nozzles are available in sizes from 1/2 inch to 4 inches, and are available in spiral, threaded, flanged, and clamped connections. The spray shape is a solid cone, the spray area is circular, and the spray angle is 90° or 120° (modable).