On October 8, Japan’s NTN, the world’s leading manufacturer of precision machinery, officially settled in Nanjing. Provincial and Nanjing officials concerned attended the signing ceremony. As a global top 500 company and the world's third largest bearing manufacturer, Japan's NTN products are widely used in aerospace, transportation, automotive manufacturing, medical equipment and other fields. According to reports, NTN has invested more than US$100 million in the first phase of Nanjing and will build a production base for bearings used in high-speed railways, subways and wind power in the Jiangning Binjiang Development Zone. This is also NTN's largest production base in China. After the design factory is put into production in 2012, it can absorb more than 5,000 industrial workers and the annual production value can exceed RMB 2 billion. Construction Hoist Steel Structure
Construction Hoist Steel Structure means the construction hoist spare parts like Construction Hoist Mast Section, Passenger Hoist Cage, Construction Hoist Wall Tie and so on.
The length of each mast section is 1508mm, the rack is fixed on the mast by three bolts and it can be exchanged. For the single cage hoist there is only one rack on the mast section, and the mast section can be used for the double cages hoist by increasing one rack. The section of the mast is diverse, select one type section according to different hoist. The mast sections are bolted together with M24 bolts and nuts to form mast. The mast is tied to the building with tie-in and is the guide rail of the cage. According to the user`s or circumstance`s request, surface of mast is hot dip galvanized, which can prevent it rusting.
The tie-in(wall tie) is the linked part between mast and building, to keep the stabilization of the mast. Distance between the tie-in is about 6~9m alone the mast. There are several types of tie-in. Select one of them according to need, tie-in can adjust the vertical of mast in definite ranges. According to the user`s or circumstance`s request, surface of the tie-in is hot dip galvanized, which can prevent it rusting.
The cage dimension(L×W×H)(m): 3×1.5×2.5. We can also manufacture cages of other size according to the user`s needs. The material of the cage and the door material can be steel wire weave, aluminum-plastic panel, punched-plate, figured aluminum board or other type according to user`s needs. The gate is equipped with drawing gate,include small turn over gate.
Construction Hoist Mast Section,Building Hoist Mast Section,Passenger Hoist Cage,Construction Hoist Wall Tie, Construction Hoist Anchorage Frame SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.syconstructionhoist.com