Because I started up parking on the uphill, I killed the car and then slipped the car and hit the back car. This kind of small traffic accident happens frequently. In particular, newcomers who just came out of driving school began to feel frightened when they saw a long slope. In fact, it is not difficult to go uphill. There are many laws and techniques.

1, washed slope. If it is a straight road before going uphill, when the traffic conditions permit, the speed can be appropriately increased, and the inertia caused by high-speed driving can be used to slope. Rush slopes can last for tens of meters.

2, shift. After the slope has continued for a certain distance, the vehicle is in a state of fatigue, and the engine shows a significant lack of power. At this time, it is the time to shift gears down. At this time, the low speed gear should be quickly and accurately swapped in. Under normal circumstances, the second gear is more appropriate. When shifting gears, attention should be paid to rapid and accurate movements, not dragging water, inaccurate gear shifts, and inconveniently causing stop flameout in a timely manner. If the control is not good, the vehicle will slip backwards. This is very dangerous. Therefore, the shift should be successful once.

3, refueling. After the shift, the throttle should quickly follow, because the resistance of the vehicle's forward movement is already quite large, and the power needed should be increased accordingly. Only the low gear and large throttle can ensure sufficient climbing power.

4, the speed should be low and stable. If the ramp continues for hundreds or even thousands of kilometers, you should maintain a low range and a large throttle, and ramp up at a uniform speed. When the engine is running normally, the car will always be driven uphill, and it should not be ignored. Repeatedly changing gears.

5. Be sure to keep a proper distance from the vehicle in front so as to prevent rear-end collision accidents because the front vehicle is not timely due to lack of power or when it stalls.

Fuel saving tips when driving a car

1. When a heavy truck moves from a higher gear to a lower gear, do not wait until the inertia of the vehicle disappears and then shift gears. Instead, adapt to the early shift, otherwise it will be difficult to achieve low gear. Or even if you switch to low gear, it is not the economy speed of the file. If it is serious, it will result in parking in the middle of the slope and you need to start again to increase fuel consumption.

2, do not climb low-speed high-speed.

3, do not increase the throttle to climb. This is more than climbing up to the top of the hill with a lower-speed economic vehicle.

4, do not come before the slope to speed up the slope, but should first make a reasonable estimate of the size of the slope, the length of acceleration in advance, make full use of the inertia of the car, so that "high gear is not hard to support, low gear is not hard "To save fuel.

medical oxygen cylinders & accessories

Jiangsu Minsheng Heavy Industries Co., Ltd. , https://www.chlorinecylinder.com