Each element of steel has different effects on the depth of hardenability of auto parts. For the required hardenability of the automotive gear, it is possible to reach the depth of the top quenching test penetration of 18 or 14. Broaden a series of steel types and processes, and use In the direct normalizing, quenching and tempering process, the addition of elemental alloys and precise control of the alloy elements have greatly improved the chemical composition, microscopic structure and hardenability of the steel, enabling the production of a large number of t and traditional quenching. Tempered parts have the same strength of coupling, crankshaft and many other accessories. Furnace structure is very important to reduce energy consumption, so many improvements can be made on the production line. The effective thermal conductivity depends on the heat capacity determined by the insulator, heat source, furnace structure and size. It will greatly affect the quality, productivity and economy of the product. Further research will rely on the application of high-energy effective heat sources such as lasers, far-infrared rays, and advanced vacuum technologies. In order to make the heat treatment operation more flexible, Japan has used many small or single new furnaces, many new furnaces use ceramic fiber insulation materials, have less heat capacity, lower gas consumption due to the atmosphere and low pressure or vacuum in the furnace These stoves are designed and manufactured to meet energy saving and flexible production. Japan's low-load production systems are also used for heat treatment. For annealing and quenching, many small, flexible arrays of equipment and furnaces are installed. After the steel is directly forged or cooled after hot forging, the heat treatment step is not only less, but also the heat energy consumed during the heat treatment process is saved, so that the stored energy can be used for boiling water and cleaning, and can also be used as the surface modification in the cooling process as shown. Reactive energy.
The turn-out scrap Metal Baler machine is used to compress scrap metal (steel, copper, aluminum, stainless steel, etc)into metal block or metal bale. The purpose is to save the transportation cost or reduce the raw material loss when smelting.
After compressing, the metal bale is easy to transport and store, so it can save transporation cost, reduce storage area and reduce the loss when smelting. Easy operation, durable and long service life, high efficiency, etc.
1) Hydraulic drive, compact design, great sealing;
2) Customized press box size and bale size;
3) Bale discharging ways include turn-out, side-push out and forward-out;
4) Designed with quick unit that can improve work efficiency substantially;
5) Famous motor, hydraulic system, oil cylinder, piston pump, electrical components;
6) Blades: our scrap metal baler machine with the knife, it can cut the long size material when compressing, so it very goog for the long steel wire and big size material.
Turn-out Baler, Turn-out Baling Machine, Turn-out Baling Press, Turn-out Baler Equipment, Turn-out Metal Compactor Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.hydraulicn.com