[Die Casting Die Network] Statistics China's mold industry's annual import and export scale has reached 4 billion US dollars, of which the level of imports and exports are equivalent, are about 2 billion US dollars. The data shown by [Die Casting & Die & Die & Mould] has proved that the countries and regions with the most export destinations for molds in China are Hong Kong, the United States, Japan, Germany, and India. The export molds are mainly exported from Guangdong, Zhejiang, and Jiangsu, followed by Shanghai, Shandong, Tianjin, Fujian, Liaoning, Beijing, and Jilin; the countries with the most imported molds and supplies are Japan, South Korea, Germany, Taiwan, and the United States, with the most imported destinations being Guangdong, Jiangsu, and Shanghai, followed by Tianjin. , Beijing, Liaoning, Jilin, Fujian, Shandong, and Zhejiang. It is worth pointing out that the structural proportion of China's mold industry is relatively reasonable: about 37% of stamping dies, about 43% of plastic dies, about 10% of casting dies (including die casting dies), forging dies, tire dies, glass dies, etc. Other types of molds account for 10%. It is consistent with the proportion of mold categories in industrial developed countries.

In recent years, a large number of leading companies in the mold industry have emerged in China. For example, the car cover mold has “four people”, the large plastic mold has Haier, Warwick, Qunda line, the precision stamping mold has Guosheng, Wah Fu, the automobile tire mold has a large wheel, bold, the casting mold has FAW casting, Ningbo Heli, Guangzhou cavity, Beilun huiwang, precision plastic mold with CD, Ningbo Yokogawa and so on. According to the Wu Bingshu introduction, 95 companies in the mold industry have been awarded the title of “China's key backbone mold enterprises”. During the current Shanghai International Model Exhibition, the China Die and Mould Association will also award the fourth batch of more than 10 companies. By then, the "China's key backbone mold enterprises" will reach about 110.

For a long time, the development of China's mold industry is uneven in its geographical distribution. The development of the southeast coastal areas is faster than that of the central and western regions. The development of the south is faster than that of the north. The areas with the most concentrated mold production are in the Pearl River Delta and the Yangtze River Delta. The output value accounts for more than two-thirds of the national output value. According to Mould Network CEO and Deputy Secretary-General of Shenzhen Mould Technology Association, Luo Baihui, this pattern is undergoing profound changes in recent years. China's mold industry is expanding from the more developed Pearl River Delta and Yangtze River Delta regions to the inland and the north. There have been some new areas where the production of molds has been concentrated. There are Beijing-Tianjin-Hebei, Changsha, Chengdu-Chongqing, Wuhan and Handan areas. The development of mold collection has become a new feature, and the mold parks (cities, agglomerations, etc.) have continued to emerge. In the eastern region, Kunshan and Wuxi have already formed production bases for precision mold industry clusters; production bases for Botou and Wuhu automobile mold industry clusters; and production bases for large and precision mold industry clusters in Ningbo, Huangyan, Shenzhen, and Dongguan. Luo Baihui said that the mold industry is widely viewed in China. In recent years, China's mold industry has accelerated the pace of system reform and mechanism conversion, and the industrial structure has become more and more reasonable, mainly manifested in the development speed of large-scale, sophisticated, complex, long-life mold standard parts higher than the industry. The overall development rate; the proportion of plastic molds and die-casting molds has increased; the number and capability of professional mold manufacturers facing the market have increased rapidly; with the continuous deepening of the economic system reform, the “three foreign capitals” and private enterprises have developed rapidly.

More importantly, China's mold industry is not only large-scale, but also more and more rich grades. At present, the proportion of high-level molds represented by large-scale, sophisticated, complex, and long-life molds has reached more than 35%. For example, car cover molds have been able to produce B-type vehicle molds; the accuracy of precision molds has reached 0.5 micron; precision Progressive molds can be used on high-speed punch presses 2000-2500 beats/min; plastic mold precision reaches micron level, adapted to the needs of IT industry development; single set of tire active tools with weight up to 120T and diameter of 4 meters become the largest Type of mold and so on. According to the analysis of the CEO of DieNet and the Deputy Secretary-General of the Shenzhen Die & Mold Technology Society, Luo Baihui, since 1997, with the rapid growth of automobiles, equipment manufacturing and household appliances, the demand for China's domestic mold market has begun to increase significantly. By 2009, the sales of Chinese mold enterprises had exceeded 100 billion yuan, and domestic stamping dies and die-casting molds accounted for about 80% of the total. Many foreign companies have also entered the Chinese market to share this market, and their market is very rapid and very fast. This is also due to the rapid development of the Chinese economy, including the suffering of economic and financial crisis, although it has been affected Relatively small impact, still maintained at a rate of more than 15% growth, a small number of foreign mold companies that have entered China began to produce a variety of high-precision and multi-functional molds, but the demand is still in short supply. Luo Baihui believes that the potential of China's mold market is very large at present. The good quality stamping dies are in short supply in the automotive industry, IT electronics, building materials and hardware industries; the demand for die-casting molds in auto parts and equipment manufacturing industries surges; injection molds are used in household appliances. The development potential of such industries is also great; in addition, special molds have great development prospects.

After experiencing the financial crisis since 2008, the current international economic development is undergoing a recovery process. The international investment and consumer markets are further heating up, and the economic situation is becoming more and more stable. This has brought the mold industry into a fast lane for development. Development Environment. With the recovery of the world economy, it is believed that the development of China's mold will be further accelerated. Luo Baihui pointed out that in the rapid growth of China's molds, it is necessary to strengthen its own cultivation in order to enhance the competitiveness of foreign molds. Quality, technology, and equipment are all important. Talents are also the key. Grasping these skills can be faster.