Concrete Pump Rubber End Hose
Concrete Pump Rubber Hose is an available part used at the end of pipeline.There are 2 different types:Steel Wire Hose and Fabric Braid Hose,met we show you the deatail informations about rubber hose firstly.
1.Product Introduction
We are located in Hebei province. Our main business include concrete pump spare
parts, concrete pipe, concrete elbow and clamp. We supply spare parts for Putzmeister
Pump, Schwing Pump, Zoomlion Pump, CIFA Pump, Kyokuto Pump etc. Besides we
could also produce parts as customers` drawing.
We have professional working team, business team, technical team, service team.Our
annual sales about USD 5million.Our business market mainly in North America, Eastern
Europe, Africa, Mid East, Western Europe and Domestic Market.
Rubber Hose Systems,Flexible Rubber Hose,Concrete Rubber Hose,Dn125 Rubber Hose HBYM GROUP Co,.LTD , http://www.hbympumpparts.com
The punch press is mainly aimed at the stamping of the sheet. Through the mold, it can make punching, forming, stretching, trimming, fine punching, riveting and extrusion parts, etc. It is widely used in various fields such as electronics, communications, home appliances, and transportation.
Punch is the conversion of circular motion to linear motion, the main motor output, drive the flywheel, clutch driven gear, crankshaft (or eccentric gear), connecting rod and other operations to achieve the linear motion of the mold.
Second, the characteristics of punch control
1. The dead point problem of the crank linkage
The punch press usually uses a crank-link mechanism to convert the rotary motion into a reciprocating motion, and the crank-link mechanism has a dead point (both the "top dead point" and the "bottom dead point"). During the entire motion cycle, the load is Changes are uneven and present periodic fluctuations.
2. Mutation load problem during stamping work
There are basically at least three working points in the press, and the load has the nature of a sudden change: (1) crossing the top dead point; (2) crossing the bottom dead point; (3) touching the workpiece during stamping.
3, part of the workpiece stamping, the problem of low-speed operation
Automatic continuous punching, because robots are involved in picking and feeding, the higher the speed, the better. In some cases, the punch press is required to have relatively good low speed characteristics.
4, when adjusting the mold, the problem of inch
When the punch press adjusts the mold, it needs to move. That is, the clutch is continuously opened and closed, which will cause the motor to be loaded and unloaded very frequently. At this time, the inverter needs a good current suppression function.
Part No.
Product Name
Description
Specification
1
Concrete Rubber Hose
DN125/5'' *3M
4 Layers Steel Wire
2
Concrete Rubber Hose
DN125/5'' *4M
4 Layers Steel Wire
3
Concrete Rubber Hose
DN100/4'' *3M
4 Layers Steel Wire
4
Concrete Rubber Hose
DN100/4'' *4M
4 Layers Steel Wire
2.Company Introduction
Part No.
Product Name
Description
Specification
1
Fabric Braid Hose
2''
4 Layer Fabric
2
Fabric Braid Hose
2.5''
4 Layer Fabric
3
Fabric Braid Hose
3''
4 Layer Fabric
4
Fabric Braid Hose
4''
6 Layer Fabric
5
Fabric Braid Hose
5''
6 Layer Fabric
10 years experience,HBYM GROUP LIMITED is a manufacture trading company.
Application of AC80B on CNC Punching Machine
Foreword