fitting injection mold,family injection mold,desktop injection mold,design injection mold Global Molding Machinery Co., Ltd , https://www.globalinjectionmolds.com
Wireless APs can be divided into two categories: simple APs and extended APs. A simple AP is what we usually call a wireless AP. The extended AP is what we often call a wireless router. Through the wireless router, the home broadband user can realize the Internet connection sharing, and can also realize the wireless shared access of the community broadband. 
What are the classifications of wireless APs?
Wireless AP is the abbreviation of Access Point, which can be translated as "wireless access node". It mainly provides wireless workstations access to wired LANs and wireless routers from wired LANs. Wireless workstations within the coverage of access points can pass through it. Communicate with each other. This is a bit like a switch or a wireless hub.
Wireless APs are mainly used in broadband homes, inside buildings, and inside campus. Typical distances range from tens of meters to hundreds of meters. Most wireless APs also have an AP client that can be wirelessly connected to other APs. Extend the coverage of the network.
Simple wireless AP
The simple AP is what we usually call a wireless AP, which provides wireless signal transmission and reception. The working principle of the wireless AP is that the network signal is transmitted through the twisted pair. The wireless AP compiles the signal and converts the electrical signal into a radio signal to form a coverage of the wireless signal.
According to different powers, it can achieve network coverage of different degrees and different ranges. Generally, the maximum coverage distance of wireless APs can reach 500 meters. Of course, the farther the coverage distance is, the higher the wireless transmission power, but the stronger the corresponding radiation.
Most simple wireless APs do not have routing capabilities themselves and must be configured with separate routes or computers. At present, most wireless APs support multi-user access, data encryption, multi-rate transmission, etc. In a home or office, a wireless AP can achieve wireless access to all computers.
In-wall wireless AP
The in-wall wireless AP is also called a wall AP. It is a kind of wireless AP. It is small in size. Because it is specially designed to be mounted to the wall, the 86-inch wire box of the international standard can replace the wired network panel in the room. Such as hotels, dormitories, homes, office places and other areas of wireless coverage that are not convenient for large-area construction. Because the in-wall AP is small in size, it can be flexibly deployed, POE power supply, centralized AC control, etc., not only can achieve better signal coverage in the room, but also can centrally manage hundreds of in-wall AP devices. By means of the AC controller, it is possible to batch modify the encryption, channel, advertisement push, notification delivery, device fault SMS alarm and firmware upgrade of the in-wall AP.
Ceiling wireless AP
The ceiling type AP is a kind of wireless AP, which has a wide application range and can be directly installed on the ceiling to create an elegant environment for enterprises, hotels and shopping malls.
Applicable to corporate conference rooms, cafes, restaurants, lobby and leisure areas, shopping malls and leisure areas, etc., can be increased at any time according to needs. Centralized management is adopted, and the AC controller is used for centralized management. In the machine room center, each device of the network node can be remotely accessed and controlled, so that the network administrator can see the operation of the network at a glance and control freely.
application solution: