Utb Tractor 350/ 650 Cylinder Liner 88593190 D115 /D121 Engine

<

  • Model NO.: UTB 650
  • Certification: CE, RoHS, ISO
  • Material: Metal
  • Payment: 30% Prepayment, 70% Effected Before The Shipment
  • Classification: Semi or Full Finished
  • Extra Service: Free Laser Mark
  • Selling Point: Factory Supplier with Attractive Price
  • OEM No.: 88593190
  • Trademark: XYTOSAN
  • Origin: Anhui China
  • Application: Tractor
  • Color: Silver
  • Delivery Time: 25--50days
  • Guarantee Period: 1--2years
  • Surface Treatment: Chromium/Phosphated/Copper Plated
  • Cylinder Liner Suit for: Utb 650
  • Size: 108
  • Cylinder Number: 6
  • Specification: STD/OEM/ODM
  • HS Code: 8409919930
UTB tractor 350/ 650 cylinder liner 88593190 D115 /D121 engine

Specifications
Cylinder liner of mack features: 

1.QS9000/ISO/TS16949 

2.OEM for domestic main engine 

3.Process as per customer's sample

Product Name: Cylinder Liner
Apply For: UTB
Engine Model: UTB650
OEM No.:  88593190
 
More choice:
Engine Mode OEM REF No.Cyl Bore Total Length
D343/1693 6N8700 6 137.15 305
D346 8
D348 12
D349 16
3406
6 137.15 274.3
3408 2W6000 8
3412
12

 
 
1- 8 production lines and strong casting ability for cylinder liners;
 
2- Wet and dry cylinder liners;
 
3- Slip Fit (F), Press Fit (SF);
 
4- Their diameters can range from 55 to 250mm;
 
5- Oxidation phosphor reason and the plasma, laser hardening;
 
6- DIN/ISO4383 and ISO/TS16949 certificated;




1)Wet cylinder
 
The location bores and particularly the running surfaces in the cylinder block must be cleaned carefully and they must be undamaged. Corroded surfaces must be reworked (used flange liners and outer diameter oversize liners). As this is done, make sure that the liners moves in easily and that they take up the correct position (the projecting length of the liner must be in accordance with the regulations of the engine manufacture). After the liner has been installed with the seat rings that belong to it.
 
(use slip agent), the cylinder diameter is to be checked particularly in the region of seal rings so as to determine whether any deformation has been caused by pinched sealing rings. Using the wrong sealing rings (wrong diameter/ wrong materials) can a narrowing of the cylinder which can lead to engine damage.The cooling system should be pressure tested after the liners have been installed so as to determine whether there is any leakage before the engine is started.
 
2)Semi-finished cylinder liner
 
The surface which supports the flange must be vertical to the location bore and it must be sufficiently and evenly beveled. If the liner flange is unevenly supported it can tear off. After the installation of the liner, which is only semi-finished in its inside diameter, this cylinder boring is finely bored and then finished by honing until it has the specified dimensions or, in the case of finely bored liner.It is only finished by honing (tolerance accordingly to DIN ISO H5). The surface of the liner must be flush to the sealing surface of the cylinder block, if necessary,the block surface and the liner must be finished by surface grinding.
 
3)Finished Cylinder liner
 
Before the liner is installed, the location bore in the cylinder block must be cleaned carefully and must be checked to ensure the accuracy of the dimensions and to determine whether any distortion has occurred. Out of center or damaged bores can be reworked for the installation of oversize liners. It is important for this that the locating bore is cylindrical, as this is what determines the geometrical shape of the inside of the pressed in, thin walled liner.
 
 
4)Air cooling cylinder liner
 
In accordance with the instructions from the engine manufacture, cast iron cylinders or light alloy cylinders are used. 
 
Light alloy cylinders are separated into several groups due to the small installation clearance in the standard cylinder dimensions
 


 
 Cylinder liner which we can  produce as follows:
 

Model:		  OEM NO. :  Forms  Overall Size(mm)
 504L/404  CLPG408401FG  F/F   84*136
 504GL 
 F/F   88*136
 504D  
 F/F   88*173
 206
 F/F   75*135
 305  CLPG407801FG   F/F   78*133
 405  CLPG408301FG  F/F  83*141
 205D-309D-405D/1.8LTD
 S/F  79*154
 405 DIESEL 
 S/F  82*154
 504D/505DT/604DT  2.3LD/2.3LTD/2.5LD/2.5LTD  S/F  92*171
 XD90   039WN15 
 90*193
 XUD9
S/F  82*153.


Name of Material		 C S Si P Mn Cr B Cu Ni V+Ti Mo Mechanical Properties
Boron Cast Iron 2.8~3.6 <=0.12 2.0~2.7 <=0.5 0.7~1.2 0.3~0.5 0.04~0.08



Brinell Hardness>210HB,
σb>=200Mpa
Boron Copper Gray Cast Iron 2.8~3.6 <0.2 2.0~2.7 <=0.5 0.7~1.2 0.2~0.5 0.04~0.08 Right amount


Brinell Hardness>210HB,
σb>=240Mpa
Vanadium, Titanium Gray Cast Iron 3.0~3.6 <0.2 2.0~2.7 <=0.5 0.6~1.2 0.2~0.5


>=0.3
Brinell Hardness>210HB,
σb>200Mpa
Molybdenum Nickel Copper Gray Cast Iron 2.8~3.6 <0.2 1.8~2.4 <=0.3 0.5~1.0 0.2~0.5
0.3~0.6 Right amount
Right amount Brinell Hardness>210HB,
σb>235Mpa
Bainite Gray Cast Iron 2.7~3.3 <0.10 1.7~2.5 <=0.3 0.3~0.7 0.~0.5
Right amount Right amount
Right amount Brinell Hardness270~330HB,
σb>350Mpa
Nickel Copper Gray Cast Iron 2.8~3.7 <0.12 1.8~2.7 <=0.3 0.5~1.2 0.15~0.5
Right amount Right amount

Brinell Hardness>200HB,
σb>196Mpa


 We are professional supplier for Tractor parts,Auto parts,Combine spare parts,Agriculture Spare Parts,Truck part such as
  Model: MTZ,MTZ80,MTZ70,MTZ50,UTB,UTB 650 ,KUBOTA , KUBOTA588, KUBOTA688, Massey Ferguson,DT-75, DT-55,KAMAZ,FORD,LADA
     ISUZU,DAIHATSU,HINO,JOHN DEERE,MAZDA,TOYOTA,MITSUBISHI,NISSAN,VOLVO,KOMATSU,
PERKINS,CATERPILLAR,MAN,I.H.C,BENZ,PEUGEOT,KIA,FIAT,CUMMINS,RENAULT,SCANIA,
DAF,DETRIOT,STERY,MWM,KUBOTA,YANMAR
Material: boron alloy, boron-copper alloy casting iron & Mixing with chrome, molybdenum, nickel etc.
Different Treatment: Phosphated, Nitrided, Chrome plated.
Develop the new items according to the sample or product draft.
We have the ability to make the products according to customer's samples and drawings and hope to cooperate with the new customer.
Service:
 
1. New products can be developed upon customers' sample or drawing.
 
2. Factory supplier owning attractive price.
 
3. Samples can be sent for customers to check the quality before ordering
 
4. Accepting trail order.
 
5. Free simple laser mark can be offered .
 
Contact information:


ANQING XINYI AUTOPARTS CO.,LTD.
NO.80 Tianzhushan Road, Anqing City,  Anhui Province,PRC
 
TEL: +86-556-5675009/ 5171002          
FAX: +86-556-5171000 

General auto repair tools

General Auto Repair Tools,Body Shop Tools,Car Repair Tools,Auto Body Repair Tools

WUQIANG HONGMA TOOLS MANUFACTURE CO., LTD , https://www.hmfarmjack.com