YUKA Compressed Air Filter design in according with ISO8573.1-2010 standard. With die-casting integrated technology, housing with 15 years spanlife, internal & external anti-corrosion treatment, 100% leakage tested in three time for each air filter.With sodium borosilicate fiber glass element material which help filtration up 0.01 micron for particles dust removal, 0.001mg/m³ for oil vapor residual.
Compressed air filter type:
Coalescing Filters
Coalescing Filters are probably the most important items of purification requirements in a compressed air system,which are designed not only to filter oil vapor and water, but also to filter solid particulates to an acceptable level as small as 0.01micron in size. Usually, in the installation system, the first filter's purpose is to pre-filter, protect the highefficiency filters from bulk contamination so as to provide high quality compressed air. If the air filters worked under damp or full of water adsorption condition, it would prevent the compressed air from getting through the filter element and the air low would force the liquid to get through from the pores of the element media. Thus increase working pressure drop and reduce filtration performance.
Activated Carbon Filters Aluminum Air Filter,Coalescing Air Filter,Air Compressor Filter,Activated Carbon Filter Hongrijia Depurate Facility Science & Technology Co.,Ltd. , https://www.yukafilter.com
Oil vapor can easily get through the coalescing filters in a state of gaseous, so the adsorptive filter must provide large activated carbon adsorption bed. Because the damp air will reduce the adsorptive ability of the activated carbon, the adsorptive filter usually installed after the adsorptive dryer, in order to guarantee effective removal of oil vapor and peculiar odor. it's not used to remove the liquid oil or aerosols, thus poor maintenance and lack of pre-filter will accelerate its invalidation.
Summer quietly descended to the driving car cleaning what precautions - sweeping car modification factory
Summer quietly descended to the driving car cleaning what are the matters needing attention --- Sweeper car modification plant
Pay attention to checking the level of the battery and the electrolyte density. Adjust the generator regulator to reduce the generator's charge current.
Before entering the summer, seasonal maintenance should be carried out. According to the instructions in the instruction manual, replace the oil used in engine summer, replace gear oil for transmission and main reducer in summer, and use CD-grade 15W/40 diesel engine oil for EQ1090T9ADJ3AC model power steering gear oil.
Pay attention to the engine overheating while driving. The engine temperature should not exceed 90 °C. Check the amount of cooling water frequently, and add replenishment in time.
When “oil resistance†occurs in the oil circuit, stop cooling or take preventive measures to reduce the “air resistanceâ€.
Always check the tire pressure and temperature of the road sweeper. If the fetal temperature is too high, the shade should be stopped to cool down. It is forbidden to use cold water or deflation method to cool down the temperature, otherwise it will accelerate the damage of the tire.