First, the wetted material. Our company has a large professional mold consulting, mold design, mold production, inspection, packaging, delivery team. Good design, familiar with Solidworks, UG, PROE, CAD/CAE/CAM advanced equipment, edM, milling, grinding, turning, CNC machine tools, tolerance up to +/-0.002mm. Strict quality inspection with micrometer, altimeter, projector, CMM, etc. Be sure to respond to all your quotes or emails within 24 hours. We can provide mold plans and drawings. Let you know all the machining process through pictures or progress charts. Free samples for your reference. Have strong after sales service ability and problem solving ability, help customers to conduct company information discussion. Precision plastic mold parts, precision connector mold parts, precision mold parts Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com
We should consider the medium measured by the pressure transmitter. The material of the contact medium of the general pressure transmitter is made of 316 stainless steel. If your medium is not corrosive to 316 stainless steel, then basically all the pressure changes. The transmitter is suitable for your measurement of the pressure of the medium.
If your medium is corrosive to 316 stainless steel, then we need to use a chemical seal, which not only can measure the pressure of the medium, but also effectively prevent the medium from contacting the wetted part of the pressure transmitter. Protect the pressure transmitter and extend the life of the pressure transmitter.
Second, the pressure transmitter accuracy level.
Each type of electronic measuring instrument will have accuracy error, but the accuracy level of each country is different. For example, the accuracy of national standards such as China and the United States is the part of the sensor with good linearity, which is what we usually do. The accuracy of the measurement range is between 10% and 90%; the accuracy of the European standard is the worst part of the linearity, which is what we usually call 0 to 10% and 90% to 100% of the measurement. The accuracy of the standard. If the accuracy of the European standard is 1%, the accuracy of the standard in China is 0.5%. The accuracy of the pressure transmitter developed by Shanghai Jingta Instrument Co., Ltd. is 0.2. For pressure transmitters, please purchase refined tower products.
Third, the range of the range.
The maximum range of sensor measurement is 70% of the sensor's full scale, that is, the pressure of 70 bar is now measured. The range of our selected pressure transmitter should be 100 bar. Please choose the precision tower for the pressure transmitter.
Fourth, the output signal.
At present, due to various collection needs, there are many kinds of output signals of pressure transmitters on the market, mainly 4~20mA, 0~20mA, 0~10V, 0~5V, etc., but the more commonly used is 4~20mA and 0~10V two kinds. Among the output signals I mentioned above, only 4~20mA is two-wire system (we say that the output is several lines without grounding or shielding), and the others are three-wire system.
Fifth, the medium temperature.
Since the signal of the pressure transmitter is partially converted by the electronic circuit, in general, the temperature of the pressure transmitter is -30 to +100 degrees. If the temperature is too high, we generally use a condensation bend to cool. The medium, so the cost of producing a high temperature pressure transmitter for the manufacturer will be much lower.
Sixth, measure the medium.
Generally, we measure relatively clean fluids. We can use standard pressure transmitters directly. If the medium you are measuring is crystallized or viscous, we usually use external diaphragms. Or use with a chemical seal, this will effectively prevent the medium from blocking the pressure measuring hole.
Seventh, others.
After confirming the above five parameters, we must also confirm the process connection interface of your pressure transmitter and the supply voltage of the pressure transmitter; if it is used in special occasions, the explosion protection and protection level should also be considered.
1) mould base: LKM Brand, HASCO and so on 2) Cavity/core material: DIN1.2344, 738H, 718, 8407, S136, NAK80,P20, SKD-61, NIMAX etc 3) Cavity Qty: Single/ Multi-cavity. 4) Lead time: 25-50days based on the different products 5) Warranty: 500,000-1,000,000shots as per customers` requirement 6) Products material: PP, PA, POM, ABS, PET, PC, PE,HDPE, PA66+GF,PVC, TPE,etc 7) Hot Runner: HASCO, YUDO, DME, MOLD-MASTER 8) Color Standard: Pantone, Ral 9) Texture: VDI, YS 10) Price Terms: according to the clients' request. 11) Packaging: Wood case,plastic,color box,carton or as per customers` requirement .