Gas Analyzer also known as Combustion Analyzer , Exhaust Gas Analyzer is basically a 5 gas analyze that for measuring automatic car vehicle exhaust gas by gasoline diesel engine or any other alternative power source.
3. Rebar Detector that we offer are Rebar Scanner , Rebar Locator , concrete Cover Meter , integrated rebar ferro scanner, rebar corrosion detector, etc.
Schmidt Hammer adopted module design method,easy to maintain,capable of replacing mechanical rebound part. The operation of Bluetooth wireless transmission is available.Seamless connection with Construction Quality Testing and Management System.
Water Leak Detector is used to locate and identify underground water supply, heating pipeline leak location dedicated instrument, can also be used for other pressure piping systems leak detection.
Flow Meter is divided into differential pressure flowmeter, rotor flowmeter, throttle flowmeter, slit flowmeter, volumetric flowmeter, electromagnetic flowmeter, ultrasonic flowmeter. Classification by media: liquid flow meter and Gas Flow Meter .
CCTV crawling Pipe Inspection Camera robot is mainly used in petroleum and petrochemical, municipal drainage pipeline internal rapid detection and diagnosis, the device is equipped with strong light and portable lighting control system
Dosimeter is a portable β and γ radiation measuring instrument. Build in a high sensitive gamma beta Geiger-Muller counter. With fast response, wide measuring range characteristics. Using for measuring X-ray, gamma and beta radiation. It`s a multipurpose radiation dose rate measuring instrument.
Gas Analyzer, Rebar Scanner, Rebound Hammer, Pipe Crawler Robot Shandong China Coal Industrial&Mining Supplies Group Co.,Ltd , http://www.chinacoalindustry.com
Description
Carbon steel, stainless steel and alloy flanges, are manufactured as per the standards of BS, ANSI, JIS, DIN, and UNI.
Flanges are the connectors used in process piping to connect pipe to tees, elbows, valves, pumps and whatever other equipment may be necessary.Â
Types: Flat Face Flanges, Slip On, Welding Neck, Blind, Threaded , etc.Â
Water , Oil, Gas, Industrial UsingÂ
SpecificationsÂ
1. Standard:(forged flange)
ANSI,JIS,DIN,BS4504,SABS1123,EN1092-1, UNI,AS2129,GOST-12820
2. Type:
Plate,Slip-on,Welding Neck.Thread,Socket weld,Blind
3. Size:
1/2-78 inch (DN15-DN2000)
4. Material:
Carbon steel: A105,SS400,SF440 RST37.2,S235JRG2,P250GH,C22.8
 Stainless Steel: F304 F304L  F316  F316L 316Ti
5. Surface Treatment
Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc,
Hot dipped Galvanized.
6. Inspection:
factory in-house self check or Third Party inspection
7. Packing:
No Fumigate  or Fumigate Playwood/Wood Pallet or Case
8. Payment Term:
L/C at singht  or 30days OR T/T
9.Delivery time:
Within  30days  for  2000tons
10.Supply Capacity:
 20000tons  per  year
2.types:slip on,welding nect,blind,threadedÂ
3.standard:ANSI, DIN, EN1092-1, NF
Our Services
1) sample fee:The sample fee just the cost price , the sample fee is refundable if you place a big order later
2) freight: we usually send samples through Express such as UPS, DHL, Fedex, etc. or on your own requirement
3) sample time: 7-10 days
Service
1)Your inquiry will be replied within 6 hours.
2)Well-traind&experienced sales can reply your inquiries in English.
3)During working time,E-mail will be replied to you within 1 hours.
4)OEM&ODM projects are highly welcomed ,we have strong R&D team,can help modify drawings
5)The order will be produced exactly according to order details and proofed samples,our QC will submit inspection report before shipment.
6)Your business relationship with us will be confidential to any third party.
7)Good after-sale service.
FAQ
1: how to contact with sales ?
A:you can send inquiry of our products,it will be replied within 6 hours;
you can contact dirrectly with our sales through Alitalk or WhatsApp,Skype as you like.
2.What information should I give to you for inquiry?
If you have drawings or samples,pls feel free to send us,and tell us your special requirements  such as material ,tolerance,surface treatments  and the amount you need,ect .
Â
3. how about certificate?
We will make 100% full inspection and provide the inspection reports.
Â
4.Is it possible to return the money if the quality is not good?
This has never been occured right now ,as we treat the quality as our key of development.Quality and service is everything for us.
High-production 6061T6 aluminum flangeÂ
Description
Carbon steel, stainless steel and alloy flanges, are manufactured as per the standards of BS, ANSI, JIS, DIN, and UNI.
Flanges are the connectors used in process piping to connect pipe to tees, elbows, valves, pumps and whatever other equipment may be necessary.Â
Types: Flat Face Flanges, Slip On, Welding Neck, Blind, Threaded , etc.Â
Water , Oil, Gas, Industrial UsingÂ
SpecificationsÂ
1. Standard:(forged flange)
ANSI,JIS,DIN,BS4504,SABS1123,EN1092-1, UNI,AS2129,GOST-12820
2. Type:
Plate,Slip-on,Welding Neck.Thread,Socket weld,Blind
3. Size:
1/2-78 inch (DN15-DN2000)
4. Material:
Carbon steel: A105,SS400,SF440 RST37.2,S235JRG2,P250GH,C22.8
 Stainless Steel: F304 F304L  F316  F316L 316Ti
5. Surface Treatment
Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc,
Hot dipped Galvanized.
6. Inspection:
factory in-house self check or Third Party inspection
7. Packing:
No Fumigate  or Fumigate Playwood/Wood Pallet or Case
8. Payment Term:
L/C at singht  or 30days OR T/T
9.Delivery time:
Within  30days  for  2000tons
10.Supply Capacity:
 20000tons  per  year
2.types:slip on,welding nect,blind,threadedÂ
3.standard:ANSI, DIN, EN1092-1, NF
Our Services
1) sample fee:The sample fee just the cost price , the sample fee is refundable if you place a big order later
2) freight: we usually send samples through Express such as UPS, DHL, Fedex, etc. or on your own requirement
3) sample time: 7-10 days
Service
1)Your inquiry will be replied within 6 hours.
2)Well-traind&experienced sales can reply your inquiries in English.
3)During working time,E-mail will be replied to you within 1 hours.
4)OEM&ODM projects are highly welcomed ,we have strong R&D team,can help modify drawings
5)The order will be produced exactly according to order details and proofed samples,our QC will submit inspection report before shipment.
6)Your business relationship with us will be confidential to any third party.
7)Good after-sale service.
FAQ
1: how to contact with sales ?
A:you can send inquiry of our products,it will be replied within 6 hours;
you can contact dirrectly with our sales through Alitalk or WhatsApp,Skype as you like.
2.What information should I give to you for inquiry?
If you have drawings or samples,pls feel free to send us,and tell us your special requirements  such as material ,tolerance,surface treatments  and the amount you need,ect .
Â
3. how about certificate?
We will make 100% full inspection and provide the inspection reports.
Â
4.Is it possible to return the money if the quality is not good?
This has never been occured right now ,as we treat the quality as our key of development.Quality and service is everything for us.
High-Production 6061t6 Aluminum Flange
Model NO.: FQ9
Manufacturing Way: Casting
Name: Phigh-Production 6061t6 Aluminum Flange
Size: Dn10 to Dn3000
Application: Water, Oil, Gas and Plumbing
Pressure: 150bls-2500bls, DIN/En/Uin:Pn6-Pn40, JIS:10k
Suface: Rust-Proof Oil, Black, Yellow, Galvanized
Head Code: Round
Packaging Details: Wooden Case or Pallet
Delivery Detail: 25days for 600tons Plate Flange Order
Model NO.: FQ9
Manufacturing Way: Casting
Name: Phigh-Production 6061t6 Aluminum Flange
Size: Dn10 to Dn3000
Application: Water, Oil, Gas and Plumbing
Pressure: 150bls-2500bls, DIN/En/Uin:Pn6-Pn40, JIS:10k
Suface: Rust-Proof Oil, Black, Yellow, Galvanized
Head Code: Round
Packaging Details: Wooden Case or Pallet
Delivery Detail: 25days for 600tons Plate Flange Order
High-production 6061T6 aluminum flangeÂ
Gas Detector is a widely used Gas Monitor equipment including single gas detector and multi 4 gas detector. various gas sensors can be chosen and combined. We offer CO Detector , CO2 Detector , H2S detector, O2 analyzer, nitrogen detector, combustible gas detector, LEL gas detector, etc. More Detail please contact us.