Quick Details:
Voltage: 220V/110V
Power: 800W
Frequency: 50HZ
Dimensions: 45cm*25cm*8 cm
Weight: 5 kg
Usage: welding ppr and pipe fittings,PPR PE PB PEX PE-RT
After-sales Service Provided: Engineers available to service machinery overseas
working rate: 20,25,32,40,50,63 MM
working temperature: 240-300°C
warranty: 1 year
Packing Color: can be OEM
MOQ: 1pcs
Sales place: middle east ,European, south east, south America,North America,Southeast Asia
Description:
This product has a precise temperature control, high reliability, security, and unique non-stick plastic mold technology
Machine Specification:

PowerÂ	800W	VoltageÂ	220V/110V
Working range	Dn20,25,32,40,50,63	FrequencyÂ	50HZ
Working temperature	270°C~300°C	UsageÂ	PPR PE PB PE-XÂ
WeightÂ	5 kg	PackingÂ	45*25*8.8 cm
20GP	2050	40GP	4615
40HQ	5470	ColorÂ	Green/yellow/orange

Machine Picture:




Instruction for use:
1. Apply die head
Place the welding machine on the stander, chose die head according to pipe's diameter, and fix it on the machine. In regular, the small end is at the front, the bigger end at the back.
2. Power on
Power on (make sure the power should be with leakage current protector) , the green light and the red light on, wait till the red light off and keep greenlight on, which indicates the machine enter into auto temperature control mode and the machine can be used.
Note: during the auto temperature control mode, the red and the green light will be on and off alternatively, this indicates that the machine is under control and it will not affect operating.
3. Fusion pipes
Using cutter to cut pipe vertically, push the pipe and fitting into die head without any rotation. Take them off immediately when heating time reached (see the table below) and insert

External diameter	Heating depth	Heat time	Process time	Cool time
20	14	5	4	3
25	16	7	4	3
32	20	8	4	4
40	21	12	6	4
50	22.5	18	6	5
63	24	24	6	6

    XINYU MOULD is a professional Aluminum die casting mould maker located in the high-end mould industrial zone in BEILUN called "Aluminium HPDC Dies Hometown" where has been globally renowned for aluminium die casting dies design & fabrication. Our experience has taught us that clear communication, precision engineering and staying current with leading edge technology ensures our customers can depend on us to manufacture superior quality, cost-effective, high-efficiency dies. The dies for light metal parts for weight reduction (Structural Parts) as well as parts for Automotive Powertrain Oil Pan , Redirector , A/C Compressor are in our competence area, and also for the other applications ,such as telecommunication, lighting, power tool, furniture...whatever the need which requires alum. die casting dies, irrespective of sophistication or size, XINYU is able to offer unparalleled die/mould solution with competitive cost but without quality compromise, for more company information, please review the following details. we are looing forward to cooperating with you.

Aluminium Die-Casting Component

    The die casting process forces molten metal under high pressure into mold cavities (which are machined into dies). Most die castings are made from nonferrous metals, specifically zinc, copper, and aluminium-based alloys, but ferrous metal die castings are possible. The die casting method is especially suited for applications where many small to medium-sized parts are needed with good detail, a fine surface quality and dimensional consistency.

    This process uses a die arranged in a large machine that has high closing force to clamp the die closed. The molten magnesium is poured into a filler tube called a shot sleeve. A piston pushes the metal into the die with high speed and pressure, the magnesium solidifies and the die is opened and the wheel is released. Wheels produced by this method can offer reductions in price and improvements in corrosion resistance but they are less ductile and of lower strength due to the nature of HPDC. 

    The density of aluminum is only one third of that of iron and steel, but its thermal conductivity is more than three times higher than that of iron. Most notably, the structural design optimization of Al substitute Steel can achieve significant weight loss for Auto industry, and the effect can be directly reduced by 50 to 100 percent. Cars use 1 kg aluminum instead of 2.25 kg steel, which can reduce exhaust gas emissions by 20 kg. it can be seen that aluminum alloys have high strength, recyclability and corrosion resistance. Low density and other high quality properties have become the first choice material for automobile weight loss. XINYU MOULD have dedicated ourselves into Auto alum. die casting industry over past years by designing and building alum. HPDC dies for AUTO OEMs which have the demand of light metal parts for weight reduction (Structural Parts) as well as parts for Automotive Powertrain Oil Pan ,Redirector, A/C Compressor are in our competence area, irrespective of sophistication or size, XINYU is able to offer unparalleled die/mould solution with competitive cost but without quality compromise, warmly welcome paying the trip to XINYU MOULD.

Xinyu Mould Capabilities

• Xinyu Mould At Glance

1.Year Of Establishment:2002

2.Location:2 (One Is Brand New)

3.Land Area:3600sqm

4.Emplyees:120

5. Equipment;CNC:18 (Makino, Toshiba, Liyang ), WEDM:10, EDM:9, Spotting Machine:2, CMM:2, Gun Drill Machine:2, Die Casting Machine:7, Others:50

• Xinyu Mould Technical Profile

1. Engineers In 2d&3d: 16

2. Engineers In Cnc Programming:6

3.File Format For 2d: Dwg&Dxf

4.File Format For 3d:Iges&Step

5.Software For 2d:CAD

6.Software For 3d:Simens NX & Pro-E 

7.Software For Programming: Powermill

8.Software For Mould Flow: Magma 

• Xinyu Mould Process Control

1.MES Process Control System

2.IATF 16949 Quality System

3.Well-Trained Operators

4.CMM Inspection 

• Xinyu Mould Advantages

1. CAE Support Magma(Lid 18175001)

2.Rich Experience In Casting Dies For Auto Structual Parts,Powertrain;Oil Pan;Redirector; AC Compressor

3.Trial Run Machines Available In House From 160t To 1600t

4.Vaccum Venting System Application In Dies

5. Partial Squeeze Skill In Dies

6.High Precision Imported CNC(5 Axis)

7.Globalized Hr Concept 

• Xinyu Mould Die Capacity

1.Max Die Size:2500*2500*1800

2.Max Die Tonnage:2500t

3.Biggest Die Casting Machine:1600t

4.Most Complex Die: 11slides

5.Yearly Capacity:350sets 

• Xinyu Mould Marketing

1.Main Market:Na;Europe;Asia

2.Main Field: Auto;Telecommunication;

Lighting;General Machinery;Power Tool

Furniture

3.Partner Offering After Sales Service:

Available In India&Us,Europe

4.Business Involved:

Aluminum Die Casting Dies

Aluminum Die Casting Components 

• Xinyu Mould Commercial Terms&Conditions

1. Fob Ningbo/Shanghai

2.Payment Term:Tt

3.For Dies:50% Down Payment 50% Prior To Delivery

4. For Castings: 10% Down Payment

The Rest Within 30days After b/l Date

5.Leadtime For Quotation:2days

6.Feedback For Customers' Query:24hours

Aluminum Die Casting Component

Aluminum Die Casting Component,Aluminum Die Casting Machinery Component,Component Zinc Aluminum Die Casting,Aluminum Component Die Casting Mould

Ningbo Beilun XinYu Mould Manufacturing Co.Ltd. , http://www.xinyudiecasting.com