Angle Cutting Saw is used for HDPE, PVC, PP,PVDF pipes and fittings cutting, The Bandsaw Machines for Workshop are important cutting equipment for hdpe fitting fabrication preparation. In order to make hdpe elbow, tee,cross and wye fittings fabrication in workshop, this band saw must be multi-angle cutting with cutting angle 0-67.5° . It should have high angle precision for band saw machines to make accurate angle fitting fabrication. Wuxi Yuda has the ideal Angle Cutting equipment from 40-2600mm to match hdpe fittings fabrication machine. A table saw excels in cutting through bigger plastic pipes or thick plastic blocks. The best saw for cutting plastic pipe in angle can choose from DQJ series Multi-angle pipeline cutting machine. for example, DQJ315 Multi-angle HDPE Pipe Cutting Machine, DQJ630 & DQJ800 Plastic Pipe Band Saws, DQJ1200, DQJ1600 Band Saw Machines and DQJ2600 Poly Pipe Angle Cutting Saw. If for automatic cutting mode, you can choose DQJ-A series Automatic Plastic Cutting Equipment. Angle Cutting Saw,Band Saw Cutting,Bandsaw Machine,Plastic Pipe Cutter WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionweldings.com
During the two-day visit, the Deputy Secretary-General of Jiangsu Province Valve Industry Association, Sheng Genlin, received the reception of the seven major leaders of the company. He has held discussions with the leaders of these companies, and has come to the site of their respective factory and production workshop. Several new factories have also been visited and researched.
The scenes of these companies showed a strong spring atmosphere everywhere. In the beginning of the new year, the production and sales of valves were well developed with full production capacity. The production and sales were flourishing. In particular, the production and sales of several companies were quite busy. Goods, some manufacturers stationed in 5-6 customers in the urging. Some of them devoted themselves to the management and quality system renewal. Some customers visited the factory site to discuss business. Some companies are visiting customers on the go, implementing business orders and negotiating cooperation. Although these enterprises are in the trend of low tide in the industry, production and sales have not been affected much, and they are still growing in a contrarian direction. The visit was deeply moved. Although the industry experienced a cold spell and the development speed slowed down significantly, the valve industry in Jiangsu remained strong. Along its own development path, it persisted in its own quality and quality, implemented technological innovation and independent innovation and development. The strategy is to find markets in the midst of difficulties, overcome difficulties in the cold, adjust product mix, strengthen market development, increase innovation and management, and maintain the pace of development and growth in development.
During the visit, President Chen Shuanghe and Vice President Chen Shuangeng of Jiangsu Chenggong Valve made a brief introduction to the company's situation and visited the new factory area where they were newly built. At present, the new factory area covers an area of ​​40,000 square meters and the new factory area was relocated last year. After more than ten years of development, the company has professionally researched, developed, produced and sold petrochemical natural gas valves. It has become a leader in the domestic urban gas valve industry and has become one of the mainstream suppliers of gas valves in China. In particular, their long-distance pipeline ball valves, based on the introduction of international advanced technology, combined with the special conditions of the domestic petrochemical natural gas, developed a new type of long-distance pipeline ball valve, to overcome the impact of the often occurring impurities in the long-distance pipeline on the ball valve seals. .
In Jiangsu Liangzheng Valve Co., Ltd., Yan Changhe, the chairman of the company, gave an overview of developments in recent years. At present, they are mainly responsible for various natural gas valves. Yan, general manager, said that although we are a small valve company, we cannot compare products with large companies. In comparison, there is no advantage in branding. However, we are doing a good job of on-site management and standard management to attract customers. As long as customers visit the site, they will have a profound impact and conduct business cooperation with them. Therefore, Liangzheng Valve has maintained a good momentum of development in recent years. Last year, production and sales maintained a growth rate of 15%. Liangzheng Valve was successfully listed in January this year and became the first listed company in the valve industry in Changzhou. It is determined to take a new step in the capital market.
Although the external environmental situation is not clear, the Jiangsu valve industry is not as unsatisfactory as it is supposed to be. It starts with the start of the New Year and presents a good situation of prosperous production and sales. Many actively seek out the market, follow the breath of early spring, and seize the spring. We have favorable opportunities to deploy the development direction of production and sales in the new year. According to the new characteristics of the industry, we will adjust the product structure and the layout of new markets. In particular, several key enterprises will present a busy scene better, and several small companies will integrate into the good development atmosphere of the Jiangsu valve industry. In order to open up new markets and actively develop their own specialty products, we have emerged from the predicament and emerged from a new world. It can be expected that in the industry downturn of the Jiangsu valve industry, as long as they adhere to their good quality, do a good job of product quality, adhere to their own high-quality, high-quality, honest, open concept, after tangible efforts, will still take the forefront of the industry .
Changzhou Valve Manufacturers Produce and Sell Prosperously
From February 25th to 26th, the secretariat of the Jiangsu Valve Association successively visited seven valve electric and valve manufacturers including Changzhou Lanling Automation Equipment, Jiangsu Chenggong Valve and Jiangsu Liangzheng Valve, etc., mainly investigating the electrical installation of Changzhou in the New Year. The company's operation status of valve production, conveyed the new year's development work of the association, and organized some activities in the near future. It also informed the completion of the 2015 major economic indicators of the Jiangsu valve industry, and communicated with the main leaders of the visiting companies to listen to plans for the development of the new year. And the idea, as well as some of the association's recommendations, in order to further promote the development and progress of the industry, enhance the level of industry development. It is expected that they will develop steadily and the New Year will reach a new level.