Blue Jacket Submersible Pump for Fuel Dispenser (TDW ESP150)

<

Model NO.: TDW ESP150
Outlet Pressure: 0.25MPa
Nominal Flow Rate: 250L/M
Protection Lever: Ipx8
Dielectric Strength: 1500V ,1 Minute, No Breakdown
Frequency: 50Hz
Motor Power: 1.3kw
Efficiency: 0.69
Noise: 68dB
Trademark: TDW
Transport Package: Each Submersible Pump with Export Nature Standard
Specification: IPX8
Origin: Wenzhou, Zhejiang, China
HS Code: 84139100
Specification

The TDW- ESP150 has a hermetically sealed motor close-coupled to the pump body.  The submersible pumps used in ESP installations are multistage centrifugal pumps operating in a vertical position. It is applicable to fuel supply system for petrol station, manufacture plants and buildings.
 
Technical Specifications:
Pump Body

Rated Voltage

AC220V

Rated Current

9.5A

Outlet Pressure

≤0.25MPa

Nominal Flow Rate

250L/m

Protection Lever

IP54
Motor

Protection Lever

IPX8

Power   

1.3KW

Frequency

50HZ

Rated Speed

2850r/min

Efficiency 

≥0.69

Power Factor

≥0.92

Noise

 ≤68dB

Insulation Resistance

Normal State20MΩ  Thermal State20MΩ

Dielectric strength

1500V ,1 minute, no breakdown
Blue Jacket Submersible Pump for Fuel Dispenser (TDW ESP150)Blue Jacket Submersible Pump for Fuel Dispenser (TDW ESP150)Blue Jacket Submersible Pump for Fuel Dispenser (TDW ESP150)Blue Jacket Submersible Pump for Fuel Dispenser (TDW ESP150)Blue Jacket Submersible Pump for Fuel Dispenser (TDW ESP150)

1- Could you develop our own design?                           Yes
2- Are you factory?                                                                Yes
3- Can we visit your factory?                                               Yes
4- Could you send the sample for testing?                     Yes
5- Could you offer door to door service?                          Yes

Contacts Eric Wu
Tel +86 0577 85881558
Fax +86 0577 85881559
Mob  +86 18657793785 
Facebook China BaoTai Science And Technology Co.,Ltd

Finned Tubes

A finned tube is a heat transfer device consisting of many parallel metal fins commonly used for heat dissipation and cooling applications. Finned tubes increase the surface area of the pipe, thus increasing the heat transfer efficiency. Finned tubes are commonly used in applications such as air coolers, automotive radiators, condensers, and evaporators. They are also used in industrial heaters and refrigerators to increase heat transfer surface area and improve efficiency.

Finned tube is a kind of new, wear-resistant, efficient heat exchange material, is a kind of energy-saving heat exchange element, it uses high-frequency power source as heat source, the steel strip, steel pipe heating at the same time, so that the fusion welding together into one, with high heat exchange efficiency, large cooling area, long service life, adapt to a wide range of temperature, high pressure characteristics, it can also be made of a variety of materials, Excellent heat transfer, durability, heat resistance and corrosion resistance. Widely used in waste heat recovery, petrochemical, power plant boiler, economizer, bus, industrial and civil construction heating, refrigeration, medical drying, wood drying, food drying system and other industries.

The main business scope is various heaters, waste heat boilers, pressure vessels, supportingair preheaters, air coolers, furnace accessories and accessories, and provide equipment installation, with EPC ability of projects. At present, our customers have covered all large and medium-sized petrochemical enterprises in China and established long-term strategic cooperative partnership with them. Products are exported to Southeast Asia, Middle East, and other regions.


Finned Tubes,Heat Exchange Finned Tube,Finned Tube Heat Exchanger,Heat Exchange Spiral Finned Tube

Jiangsu Gelan Environmental Technology Co., LTD , https://www.glkj2010.com