User demand for the product. For example, backup power system capacity requirements, frequency of use, environment used, main use, service life, reliability requirements, instantaneous discharge rate, rectifier specifications, and other battery-related performance requirements. The supplier's product commitment. Product design parameters (battery model, appearance size, rated capacity, rated voltage, weight, weight ratio energy, volume ratio energy, design life, number of positive and negative plates, positive and negative plate thickness ratio, electrolyte density, plate Type, grid material, etc., product electrical performance parameters, actual product life, installation and use environment, performance and price of different models, different types of product warranty period. Select the appropriate battery model based on the discharge capacity at full power outage: Cc= Kk·Cs /Kc Kk — capacity reserve factor, taking 1.25. Kc — Capacity conversion factor, corresponding to the discharge termination voltage of 1.8V, check the design manual battery discharge capacity and discharge time curve. Cc — Long-term discharge capacity under full stop of the accident. The battery specifications are described in IEEE Std. 485. After determining the cycle life of the system, the user can easily select the battery specifications. In the process of selecting a battery that is suitable for use, consider the following factors: Kt – Temperature correction factor that allows the battery to function properly at the lowest temperature expected. Kd – Design margin factor that allows the battery to compensate for additional loads. Ka – Aging factor that allows the battery to meet its useful life.
Brass has excellent CNC Machining Turning performance, high-speed machining turning under the brass can get excellent surface finish. Our technical team has very good experience in machining brass, machining brass including brass plate, brass rod, brass tube. Brass hardware parts has high strength, good plasticity in hot state, good plasticity in cold state, good machinability, easy welding and good corrosion resistance. Brass parts are very durable. It is electrically conductive and does not usually corrode or deteriorate over time. Thus brass is often used to produce products with longer service life. Machining brass parts Widely used: pipes, radiators, ship parts.
Machining Brass, Brass Machined Parts, Perfessional Brass Parts Machining, Machining Brass Conponents, Brass Parts Machining Hong Kong RYH CO., LTD , https://www.cncmachiningpart.com
Battery selection and specifications
In order to make the battery system have higher reliability, the battery must be correctly selected first. The UPS and the communication battery are different in design: some batteries have better cycle characteristics; some batteries are suitable for starting; some batteries are suitable for low temperature environment; Some batteries are suitable for small current discharges and so on. When selecting a battery, it is necessary to understand the difference in the process and use of various batteries, and fully understand the electrical performance of the battery and the user's own demand for product performance.