Automatic Large Stator CNC Coil Winding Machine for Three Phase Motor

<

Model NO.: RX3A-550
Weight: 300kg
Application: Motor Stator
Swing Diameter: Max 550mm
Trademark: NIDE
Transport Package: Plywooden-Case
Specification: customized
Origin: China
Model NO.: RX3A-550
Weight: 300kg
Application: Motor Stator
Swing Diameter: Max 550mm
Trademark: NIDE
Transport Package: Plywooden-Case
Specification: customized
Origin: China

Automatic Large stator cnc coil winding machine  for three phase motor

(1) Machine function and characteristic

This motor stator winding machine is suitable for multi-connected and multi layer winding. It adopts special purpose controller which could set the function of arraying direction, winding start point, slow starting, slow ending, sides stop, auto width, auto reset, ect.
There are two alternate spindles to facilitate higher output.
This type of CNC coil winding machine is suitable for stators needs to do winding inserting by manual. The coil will be wound into the winding tooling then operator needs unload the coils mannually.

(2) Main Technical parameter:

Production name: RX3A-550 large stator cnc coil winding machine
Swing diameter: ≤550mm
Effective length of tooling: ≤400mm
Wire head: 1pc
Max stack height: 300mm
Max stator OD: 210mm
Max RPM: 500RPM

Power supply:

 220V/50/60Hz 2.2Kw
Air pressure: 0.4MPa

Weight:

 300Kg

Dimension:

 1360mm(L)*1300mm(W)*1280mm(H)

(3) Application

This stator coil winding machine is specially designed for multiple wire parallel coil winding such as fan motor, air conditioner motor, alternator, servo motor ,pump motor and three phase motor.

Stator coil winding machine winding tooling: the coil be wound into the tooling shown as below page.
Automatic Large Stator CNC Coil Winding Machine for Three Phase Motor
 

Automatic Large stator cnc coil winding machine  for three phase motor

(1) Machine function and characteristic

This motor stator winding machine is suitable for multi-connected and multi layer winding. It adopts special purpose controller which could set the function of arraying direction, winding start point, slow starting, slow ending, sides stop, auto width, auto reset, ect.
There are two alternate spindles to facilitate higher output.
This type of CNC coil winding machine is suitable for stators needs to do winding inserting by manual. The coil will be wound into the winding tooling then operator needs unload the coils mannually.

(2) Main Technical parameter:

Production name: RX3A-550 large stator cnc coil winding machine
Swing diameter: ≤550mm
Effective length of tooling: ≤400mm
Wire head: 1pc
Max stack height: 300mm
Max stator OD: 210mm
Max RPM: 500RPM

Power supply:

 220V/50/60Hz 2.2Kw
Air pressure: 0.4MPa

Weight:

 300Kg

Dimension:

 1360mm(L)*1300mm(W)*1280mm(H)

(3) Application

This stator coil winding machine is specially designed for multiple wire parallel coil winding such as fan motor, air conditioner motor, alternator, servo motor ,pump motor and three phase motor.

Stator coil winding machine winding tooling: the coil be wound into the tooling shown as below page.
Automatic Large Stator CNC Coil Winding Machine for Three Phase Motor
 

Rubber Timing Belt

Rubber Timing Belt,Rubber Ribbed Belt,Rubber Synchronous Double Belt

Young Sunrising Machinery Co., Ltd. , http://www.86belts.com