The semi-trailer powder material transport vehicle uses its own engine power to drive the on-board air compressor through the power takeoff to send the compressed air into the air chamber at the lower part of the sealed tank through the pipeline, so as to suspend the cement on the fluidized bed into a fluid state. When the pressure in the tank reaches the rated value, open the discharge butterfly valve, and the fluidized cement flows through the pipeline for transportation. It is made by domestic advanced technology, with novel design, firmness and durability. The air bag type has large bearing capacity, fast unloading speed and small residue. The integrated tank body has the characteristics of high overall strength, good rigidity, good pressure bearing and good service performance. The fluidized bed in the tank is designed scientifically and arranged reasonably, which can effectively shorten the unloading time to 1.4t/min, improve the volume utilization rate of the tank and reduce the residual ash rate, which is 0.2%. The tank body of the powder material transport vehicle adopts double cone inward inclined horizontal structure, double pipe air inlet and double cylinder feeding, and its unloading speed and residual rate meet the requirements of industry standards. Cement Bulk Trailer,Cement Bulk Semi Trailer,Cement Tank Trailer Truck,Bulk Cement Tank Trailer Truck Shandong Chengda Auto Sales Co., Ltd. , https://www.chengdasemitrailer.com
Ion chromatography is a liquid chromatography method used to separate organic and inorganic ions that can dissociate in water and is a type of high performance liquid chromatography. Since its inception in the mid-1970s, it has quickly become an important analytical tool for cations and cations in aqueous solutions. Applications range from analysis of common anions, cations, and organic acids in water to the analysis of polar organic compounds and sugars, amino acids, peptides, and proteins in biological samples.
Characteristics of Ion Chromatography Methods Determination of ionic compounds is the main content of classical analytical chemistry. There are some rapid and sensitive analytical methods for the analysis of cations, such as atomic absorption, high-frequency inductively coupled plasma emission spectroscopy, and X-ray fluorescence analysis. The analysis of anions has long lacked a rapid and sensitive method. The classic volumetric, gravimetric and photometric methods have been used. These method steps are lengthy, time-consuming, sensitive, and susceptible to interference. The developed ion chromatography overcomes the above drawbacks and has the advantages of rapidity, high sensitivity, good selectivity, and the ability to measure multiple components simultaneously. It can be said that the analysis of anions by ion chromatography is a new breakthrough in analytical chemistry.
Fast and convenient analysis of seven common anions (F-, Cl-, Br-, NO3-, NO2-, SO42-, PO43-) and six common cations (Li, Na, NH4, K, Mg2, Ca2) The time is less than 10min. For example, the separation time of the above-mentioned seven common anions can be as short as 3 minutes.
The high sensitivity of the ion chromatography ranged from μg/L to mg/L. When the injection volume was 50 μl, the detection limit of common anions was less than 10 μg/L. If you increase the injection volume and use a small aperture column (2mm diameter) or online concentration, the detection limit can reach 10-12g/L.
Selective IC methods for the analysis of the selectivity of inorganic and organic cations and cations are mainly achieved by the selection of appropriate separation and detection systems. Due to the selectivity of the IC, the pretreatment of the sample is simple, and dilution and filtration are generally required.
Simultaneous determination of multiple ionic compounds Compared to photometric, atomic absorption methods, the main advantage of ICs is the simultaneous detection of multiple components in a sample in a short time.
Separation column with good stability, high capacity IC styrene / divinylbenzene polymer is the most widely used filler. The high pH stability of this resin allows the use of strong acids or alkalis as eluents, which is beneficial for expanding the range of applications. Dissolving, diluting, and filtering are the main tasks of pretreatment when analyzing samples.