DC SOLAR WATER PUMP
 

What is solar water pump?
1. Solar pump is a pump running on electricity generated by solar panels.
2. It is off grid system, can be used in remote areas for irrigation and drinking water.
3. DC brushless solar pump system including DC brushless solar pump, controller and solar panels.

What is the advantage of solar pump?

1. With brushless permanent magnetism DC motor, the motor efficiency is 25% higher than AC motor.
2. MPPT(max power point tracking) controller, over load protection function.
3. 1years warranty, 3-5 yeas lifetime.

Feature:
1. Each solar water pump is tested after 2-3 days, the test can be finished before the factory.
2.Each motor use intelligent winding machine wire to achieve zero error.
3.Ensure that every customer receives the installation, wiring instruction, professional staff to you.


Common questions answered:
1.Is this solar water pump AC DC brushless?
    Answer: Yes
2.What are the prices included?
   Answer: Pump and controller
3.Can we match solar panels?
  Answer:Yes, the DC pumps and solar panels need to be connected to the controller.AC Can connect solar pannel directly.
4. Can the water pump connect directly to the solar panel?
  Answer: DC water pumps and solar panels need to be connected to the controller,AC Connect solar pannel directly.
5. Does the pump work at night?
  Answer: Work only when there is light in the day, and batteries for the night.
6. Can the battery outlet match?
 Answer:Batteries are usually the customer's own match.

DC solar pump installation

1. Connecting a longer cable to the pump negative terminal (black) and positive terminal (red). The cable length will be designed
as actual requirement, but make sure not to connect too long cable ,since the DC motor efficiency will be decrease during the
super long cable. It is also suggested that at least 3mm2 or 4mm2 cable to connect onto the pump. Finally, please confirm
that the cable connectors is water proof and best seal.

2. Before you start wiring the pump to the solar panel,the pump needs to be submersed in water for at least 15 minutes before
power is applied. Water is the lubrication for the pump and if it is not "preconditioned" properly the bearings will not be adequately
lubricated. This will result in premature wear and failure of the pump and will refused the warranty.

For more details . pls contact with us !

DC SOLAR WATER PUMP
 

What is solar water pump?
1. Solar pump is a pump running on electricity generated by solar panels.
2. It is off grid system, can be used in remote areas for irrigation and drinking water.
3. DC brushless solar pump system including DC brushless solar pump, controller and solar panels.

What is the advantage of solar pump?

1. With brushless permanent magnetism DC motor, the motor efficiency is 25% higher than AC motor.
2. MPPT(max power point tracking) controller, over load protection function.
3. 1years warranty, 3-5 yeas lifetime.

Feature:
1. Each solar water pump is tested after 2-3 days, the test can be finished before the factory.
2.Each motor use intelligent winding machine wire to achieve zero error.
3.Ensure that every customer receives the installation, wiring instruction, professional staff to you.


Common questions answered:
1.Is this solar water pump AC DC brushless?
    Answer: Yes
2.What are the prices included?
   Answer: Pump and controller
3.Can we match solar panels?
  Answer:Yes, the DC pumps and solar panels need to be connected to the controller.AC Can connect solar pannel directly.
4. Can the water pump connect directly to the solar panel?
  Answer: DC water pumps and solar panels need to be connected to the controller,AC Connect solar pannel directly.
5. Does the pump work at night?
  Answer: Work only when there is light in the day, and batteries for the night.
6. Can the battery outlet match?
 Answer:Batteries are usually the customer's own match.

DC solar pump installation

1. Connecting a longer cable to the pump negative terminal (black) and positive terminal (red). The cable length will be designed
as actual requirement, but make sure not to connect too long cable ,since the DC motor efficiency will be decrease during the
super long cable. It is also suggested that at least 3mm2 or 4mm2 cable to connect onto the pump. Finally, please confirm
that the cable connectors is water proof and best seal.

2. Before you start wiring the pump to the solar panel,the pump needs to be submersed in water for at least 15 minutes before
power is applied. Water is the lubrication for the pump and if it is not "preconditioned" properly the bearings will not be adequately
lubricated. This will result in premature wear and failure of the pump and will refused the warranty.

For more details . pls contact with us !